- Exhaust Pipe gaskets + bolt kits
- Throttle Linkages
- 4×4 Off Road Wading Kits
- Custom order
- Workshop Consumables
- Cylinder Head Exhaust Studs + Kits
- Exhaust Clamps
- Hose Clip
- Mini Fuel Hose Clips
- Classic Austin Rover MG
- Duratec 2.5 20v 5 cylinder ST / RS
- Ford Gearbox Oil seals
- Essex 1.7 2.0 V4
- Essex 2.5 3.0 V6
- CVH 1.8 8v
- Kent Crossflow OHV
- Lotus Twincam
- 2.5 8v Di & Turbo Diesel `Banana`
- BOA BOB 2.9i 24v V6 Cosworth
- Cologne 2.8 12v V6
- Cologne 2.9 12v V6
- CVH 1.6 8v N/A and Turbo
- I4 2.0 2.3 8v 16v DOHC
- Pinto 2.0 8v SOHC
- YB Turbo 2.0 16v DOHC Cosworth
- Zetec E 1.6 1.8 2.0 16v DOHC
- Zetec SE 1.25 1.4 1.7 16v DOHC
- Rover MG
- VAG – Audi Seat Skoda Volkswagen
- Machining Services
- Cylinder Heads
Inlet or exhaust manifold Skim | Skimming | Refacing service – Farnham
Please note we can only reface manifolds upto 120mm wide and 450mm long!!! Although this covers most 4 – 5 cylinder applications please check your manifold.
Inlet manifolds need to be flat as a lot use thin paper gaskets, custom made ones may require refacing due to the heat causing during welding.
Exhaust manifolds can warp from normal cold/hot cycles. The TD5 exhaust manifold is a prime example.
But again a lot of newer exhaust gaskets are MLS type which require the manifold to be completely flat to seal correctly.
How do I pay?
Cash or Credit / Debit card on collection (full receipt will be given).
How long will it take?
Usual turnaround is 24 – 48hrs but all depends on workload, it is not uncommon to have a lot of cylinder heads in for repair.
Cylinder head Skim | Skimming | Refacing service | Head gasket failure – Farnham£50.00Read more
Cylinder head Skim | Skimming | Refacing service | Head gasket failure – Farnham This is a fixed price listing for a skim on a 4 cylinder head Drop off your cylinder head if you are local to Farnham (GU10) and as long as it is serviceable it will have the minimum amount of material …
Brake disc or drum Skim | Skimming | Refacing service – Farnham£80.00Read more
Brake disc or drum Skim | Skimming | Refacing service – Farnham Please note we can only reface discs from 180mm to 385mm and up to 36mm vented width. Drums from 180mm to 320mm in diameter. Price is from £80.00 a pair of discs or drums dropped off to the workshop. ——————————– Provided they are …
Cylinder head pressure testing service – Farnham£50.00Read more
Cylinder head pressure testing service – Farnham Suspected cracked cylinder head? We can pressure test various heads to confirm they are cracked. Pictured is a 300 tdi Land Rover head with crack to coolant passage. Price is for a cylinder head to be dropped off to the workshop. ——————————– How do I pay? Cash or …