A 100ML TUBE OF WELLSEAL JOINTING COMPOUND
We have been using this in the workshop on customer`s engines and cylinder heads for years – Tried and tested!
————————
Wellseal was developed by Rolls Royce Ltd and manufactured under license, this compound is the complete answer to sealing problems on machined faces.
Stag Wellseal jointing compound is non-flammable, has easy partability and is non-hardening it is formulated to give the best possible sealing performance under a wide variety of conditions.
It can be used to seal threaded connections as well as flat- faced joints and can be used with or without a gasket, depending upon the design of the assembly.
Stag Wellseal Jointing Compound is highly resistant to the majority of commonly used field, lubricants and coolants and is non-corrosive and free from abrasive fillers
This Is Easy To Use And Suitable For Assembly On Head Gaskets And Bottom End Gaskets
Ideal For Machined Metal To Metal Sealing Such As The Rover K16 Cam Carrier To Cylinder Head
Rover Head Saver Shims
De-compression Plates
Engine Crankcase Split Lines
Bearing Hub Faces
And Many More Uses
Non Hardening And Flexiable When Dry
This Sealer Is Used By Many Engineers And Is A Highly Rated Non Hardening Jointing Compound
| Weight | 301 g |
|---|
Related products
-
Quick View
Inlet or Exhaust manifold stud – Cylinder head M8 x 50mm allen head stainless steel
£1.75Read moreInlet or Exhaust manifold stud Ideal for cylinder heads M8 x 1.25mm Allen head Stainless steel 50mm Overall length
-
Quick View
Hylomar Hylotyte Red 100 Gasket Jointing Compound Semi Hardening 40ml
£8.75Read moreHylomar Hylotyte Red 100 Gasket Jointing Compound Semi Hardening 40ml x1 Hylomar Hylotyte Red 100 Gasket Sealant Compound – 40ml A synthetic, semi-hardening jointing compound that has excellent gap filling properties Highly effective at sealing pitted or roughly machined surfaces, particularly those in contact with water and anti-freeze Resistant to a wide range of …
Hylomar Hylotyte Red 100 Gasket Jointing Compound Semi Hardening 40mlRead More
-
Quick View
Inlet or Exhaust manifold stud – Cylinder head M8 x 40mm allen head stainless steel
£1.75Read moreInlet or Exhaust manifold stud Ideal for cylinder heads M8 x 1.25mm Allen head Stainless steel 40mm Overall length
-
Quick View
VW Polo Lupo Fox Skoda Fabia Roomster 1.2 12v Repaired cylinder head AZQ BME BVX
£274.99Read more****Please note cylinder head is on a exchange like for like basis!**** ****Box your old head up with the return address and I will send a courier to collect at no extra cost**** Please make sure your vehicle issue has been correctly diagnosed, these engines also suffer from stuck/worn piston rings VW Polo (9N …
VW Polo Lupo Fox Skoda Fabia Roomster 1.2 12v Repaired cylinder head AZQ BME BVXRead More