Nissan CG10DE 1.0 16v head bolt set – Micra K11
Head bolt set
Washers not included – please reuse old ones
Fits all 1.0 16v engines with the following codes:
CG10DE (Distributor type only)
Ideal for junior stock rods. Same as we use on customer`s cylinder head/engine builds
| Weight | 2000 g |
|---|
Related products
-
Quick View
Nissan 1.0 1.3 8v Exhaust manifold stud + Nut kit set – K10 MA10S MA13S Micra
£8.00Add to basketNissan 1.0 1.3 8v Exhaust manifold stud + Nut kit set – K10 MA10S MA13S Micra Direct size replacement with mild steel studs, zinc plated washers and copper flashed nuts Suitable for: Nissan 1.0 8v MA10S + 1.3 8v MA13S engines K10 Micra Kit comes as pictured (Stud / nut colour may differ from …
Nissan 1.0 1.3 8v Exhaust manifold stud + Nut kit set – K10 MA10S MA13S MicraRead More
-
Quick View
Nissan 1.0 1.3 16v CG10DE CG13DE distributor o ring seal Micra K11 22131-70J00
£6.75Add to basketNissan 1.0 1.3 16v CG10DE CG13DE distributor o ring seal Micra K11 22131-70J00 Hot / cold heat cycles make them go brittle and break or just squash up causing major oil leak above the gearbox. O ring is located on the end of the distributor (earlier engines) Fits various Nissan models with 1.0 and 1.3 …
Nissan 1.0 1.3 16v CG10DE CG13DE distributor o ring seal Micra K11 22131-70J00Read More
-
Quick View
Nissan 1.0 1.3 16v CG10DE CG13DE manifold / Throttle body gasket Micra K11
£4.50Add to basketNissan 1.0 1.3 16v CG10DE CG13DE manifold / Throttle body gasket Micra K11 Cut from 0.75mm gasket paper Unlike other gaskets from competitors cut from thin 0.4mm paper To fit Nissan Micra K11 (bubble shape) CG10DE + CG13DE engine codes Multipoint injection
-
Quick View
Nissan 1.0 1.3 16v CG10DE CG13DE water pump gasket Micra K11
£7.75Add to basketNissan 1.0 1.3 16v CG10DE CG13DE water pump gasket Micra K11 Cut from 0.75mm gasket paper Unlike other gaskets from competitors cut from thin 0.4mm paper To fit Nissan Micra K11 (bubble shape) CG10DE + CG13DE engine codes Single point and Multipoint injection